2-fold universal dimmer

Code: EK-GA1-TP

Out of Production

Description

The Ekinex® EK-GA1-TP dimming actuator allows to command and regulate the light intensity of 2 groups of lighting devices. The device is suitable for the control of resistive, inductive and capacitive loads powered with 230 Vac. Different types of loads can be connected to different channels.

The device is fitted with membrane pushbuttons for manual command and LEDs for status indication; a pushbutton allows the switching between automatic or manual operation modes. The device integrates a KNX bus communication module and is realised for mounting on a standard 35 mm DIN-rail. The device is powered by the KNX bus and requires an additional 230 Vac power supply to operate the loads.

Delivery: Delivery includes a terminal block for connection to the bus.

Technical Data

Power Supply

Voltage (Loads)230 Vac 50/60 Hz

Voltage (Electronics)30 Vdc by KNX bus

Current Consumption from Bus< 13 mA

Max. Power from Bus320 mW

Outputs

Number2

Max. Controlled Power300 W

Min. Controlled Power10 W

Functions / Features

Plastic casing

Frontal programming pushbutton and LED

Membrane keyboard with LEDs for status indication of outputs

Pushbutton for switching operating mode (normal / programming)

Connection to bus line with KNX terminal block

Connection of outputs and 230 Vac power supply with screw terminals

Installation on 35 mm rail (according to EN 60715)

4 modular units (1 MU = 18 mm)

IP20 protection degree (installed device)

Weight: 160 g

Configuration and Commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKGA1TP##.knxprod (## = release).