ekinex

8-fold binary output / 4-fold blind actuator

Code: EK-FE1-TP

Phase Out
8-fold binary output / 4-fold blind actuator

Description

The Ekinex® EK-FE1-TP binary output / blind actuator allows to command 8 groups of loads or control 4 drives for motorised blinds independently. The device is fitted with membrane pushbuttons for manual command (even in the absence of bus power) and LED’s for status indication; a pushbutton allows to switch between automatic and manual operation modes. The device integrates a KNX bus communication module and is realized for mounting on a standard 35 mm DIN-rail. The device is supplied by the KNX bus and requires an additional 230 Vac power supply to operate.

Technical data

Power supply

  • •Voltage auxiliary 100-230 Vac 50/60 Hz
  • •Voltage control section 30 Vdc by KNX bus
  • •Current consumption from bus < 10 mA
  • •Power on bus < 240 mW

Outputs

  • •Number: 8 or 4 independent channels (depending on device use)
  • •Nominal voltage (Un): 100-230 Vac 50/60Hz
  • •Nominal current (In): max 16 (10) A (both @100Vac and @230Vac)
  • •Max. switched power: max 4000 VA @250Vac

Delivery

Delivery includes a terminal block for connection to the bus.

Functions / Characteristics

Plastic casing
Frontal programming pushbutton and LED
Membrane keyboard with LED’s for status indication
Pushbutton for switching operating mode (normal / programming)
Connection to bus line with KNX terminal block
Connection of outputs and 230 Vac power supply with screw terminals
Overvoltage class III (according to EN 60664-1)
Classification climatic 3K5 and mechanical 3M2 (according to EN 50491-2)
Pollution degree 2 (according to IEC 60664-1)
Installation on 35 mm rail (according to EN 60715)
4 modular units (1 MU = 18 mm)
IP20 protection degree (installed device)
Weight 315 g

Configuration and Commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKFE1TP##.knxprod (## = release).

Technical Documentation

Datasheet STEKFE1TP_EN

STEKFE1TP_EN• v. 2.1(07/09/2021)• PDF• 691,9 KB

Instruction Sheet FISPFEF1TPIEXX3

FISPFEF1TPIEXX3• v. 3.0(07/09/2021)• PDF• 834,3 KB

Application Manual MAEKFE1FF1TP_EN

MAEKFE1FF1TP_EN• v. 3.5(12/04/2024)• PDF• 3,3 MB

Application Software for ETS APEKFE1TP

APEKFE1TP• v. 0.5(02/05/2024)• ZIP• 852,9 KB

CE Conformity Declaration CEEKFE1TP

CEEKFE1TP• v. 1.0(20/01/2019)• PDF• 844,2 KB

UKCA Statement UKCADCEKFE1FF1TP

UKCADCEKFE1FF1TP• v. 1.0(07/06/2024)• PDF• 420,5 KB

KNX Certification EK-FE1-TP

KNX_Certification_EK-FE1-TP• PDF• 770,4 KB

CAD Drawing DSEKFE1TP

DSEKFE1TP• DXF• 1,3 MB