2-fold KNX Dimmer 12/24/48 Vdc

Code: EK-GD2-TP-2-LV-M

Phase Out

Description

The EK-GD2-TP-2-LV-M 12/24/48 Vdc KNX 2-fold dimmer allows brightness control in PWM mode for LED loads.

Designed specifically for dimmable LED strips and loads, it is compatible with the KNX system and suitable for monochromatic strips.

Installation is simple via DIN rail mounting, ensuring perfect integration into electrical panels. The device has an integrated SELV 30 Vdc bus communication module, KNX certified.

Technical Data

Inputs

Constant Input Voltage12 / 24 / 48 Vdc

Supply VoltageMin: 10.8 Vdc .. max: 52.8 Vdc

Max. Input Current12 A

Outputs

PWM Voltage Output12 / 24 / 48 Vdc

Output Current6A per single fold, or 12A for 2 fold connected in parallel

Output Channels2

Dimming

PWM Dimming ModeIn the range 250 Hz ÷ 6 kHz

Supply & Delivery

The supply includes a terminal for connection to the bus line.

Functions and Features

Selection of PWM output frequency from ETS, from 250 Hz to 6 kHz

Fade-in time on and off, minimum and maximum brightness levels, linear or logarithmic adjustment curve settable from ETS

Possibility of connecting outputs in parallel to increase output power

Configuration of behaviour after power restoration, bus ON/OFF, download via ETS

Folds can be set from ETS as independent, in parallel or with copy function from another fold

Lock function, forced operation, staircase lighting, scenarios, night mode, counter and logic functions for each fold, settable from ETS

Auxiliary output function via relay (external) with status indication via KNX

Degree of protection: IP00 (IP20 in junction box or electrical panel)

Power supply and load wiring: 0.05 to 2.5 mm2 (30 to 12 AWG)

Configuration and Commissioning

A detailed description of the parameters can be found in the device application manual. ETS5 or higher is required for configuration and commissioning. Application program for ETS: APEKGDXTPXLVM##.knxprod (## = version).