4-fold 0-10 V Actuator

Code: EK-GF1-TP

Description

The Ekinex® 4-fold 0-10 V actuator EK-GF1-TP can be used as 0-10 V control output device or, alternatively, for controlling dimmerable LED power supply units.

When used for LED controlling, the selection of the colour can be made optionally in HSV or RGB mode. Scenarios, predefined sequences, sequence repetition and random functions are available; the dimming speed and the holding time are programmable.

The device is fitted with membrane pushbuttons for manual command and LEDs for status indication; a pushbutton allows the switching between automatic or manual operation modes. The device integrates a KNX bus communication module and is realised for mounting on a standard 35 mm DIN-rail. The device is powered by the KNX bus.

Technical Data

Inputs

Control Voltage30 Vdc by KNX bus

Rated Output Stage Supply Voltage100-230Vac, 50/60Hz max 5W

Outputs

Number of Channels4

Output Range0-10 V or 1-10V

Max. Current per Channel50 mA

Supply & Delivery

The device is powered by the KNX bus. Delivery includes a terminal block for connection to the bus and a terminal block for connection to the auxiliary power supply.

Functions and Features

Plastic casing

Frontal programming pushbutton and LED

Membrane keyboard with LEDs for status indication of outputs

Pushbutton for switching operating mode (normal / programming)

CH pushbutton for individual or simultaneous channels control

HSV / RGB pushbutton colour control mode

Connection to bus line with KNX terminal block

Connection of outputs with screw terminals

Installation on 35 mm rail (according to EN 60715)

4 modular units (1 MU = 18 mm)

IP20 protection degree (installed device)

Configuration and Commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKGF1TP##.knxprod (## = release).