KNX Dimmer 90-230V~50/60Hz 4-channels

Code: EK-GD1-TP-4-HV

New

Description

KNX bus device with 4-channel phase cut dimmer function for light loads, with supply voltage 90-230 Vac at 50/60 Hz. Use in KNX standard home and building automation systems.

NOTE: Loads that can be used with the dimmer can be: incandescent lamps, mains voltage halogen lamps, mains voltage dimmable LED lamps, mains voltage dimmable LED strips, switching power supplies for dimmable LEDs in phase cut. The dimmer cuts phase in trailing edge mode.

Technical Data

Inputs

Supply Voltage90-230 Vac 50/60 Hz

Max. Input Current4 A

Outputs

Output Channels4

Output Power per Channel110 W @110 Vac, 220 W @220 Vac, 230 W @230 Vac

Minimum Load Power1 W per channel

Max. Output Current1 A per channel

Dimming

Dimming ModeTrailing edge phase cut

Functions and Features

Degree of protection: IP00 (IP20 in junction box or switch cabinet)

Fade time on and off, minimum and maximum brightness level, linear or logarithmic dimming curve settable via ETS

Configuration of behaviour after power reset, bus ON/OFF, unloading via ETS

Channels can be set by the ETS as independent, in parallel or with copy function from another channel

Status indication of outputs via LEDs

Locking function, forced operation, staircase light, scenes, night, counter and logic functions for each channel, settable via ETS

Auxiliary output function with status indication via KNX

Manual operation with membrane buttons and for local ON/OFF testing of channels 1234 even in the absence of the KNX bus: short press of the button switches the load on/off, pressing for at least 2 seconds causes the load to flash every 1 s approx.

Configuration and Commissioning

A detailed description of the parameters can be found in the device application manual. ETS5 or higher is required for configuration and commissioning. Application program for ETS: APEKGDXTPXHV##.knxprod (## = version).