Description
The single-channel phase cut dimmer EK-GD2-DL-1-HV allows the brightness control of LED and halogen sources with a voltage of 90-230 Vac 50/60Hz for up to 220W. Input Bus DALI-2 reference IEC 62386 standard.
NOTE: For electronic loads and/or LEDs consider maximum power halved from nominal value.
Technical Data
Electrical Data
Dimmer TypeSingle-channel dimmer with phase-cut output
Supply Range90 - 230 Vac 50/60 Hz
Maximum Output Power230W (220W nominal)
Control InputsDALI bus (reference IEC 62386 standard)
Maximum Resistive Load1A (for electronic and/or LED loads the power is halved)
Conductor Diameter12-30 AWG (0.05 - 2.5 mm²)
Storage TemperatureMin: -40 °C ... Max: +60 °C
Housing & Installation
HousingPlastic casing
InstallationDevice for free installation in junction boxes or wall
DIN Rail MountingMounting on 35 mm profile rail (by means of holder included)
Degree of ProtectionIP10 (device installed)
Functions / Features
Dimming up to complete switch-off (dim-to-dark)
Minimum brightness level: 1%
Optimised output curve
Full compliance with DALI-2 standard (IEC 62386)
Compact plastic casing for junction box or 35 mm DIN-rail installation
Configuration and Commissioning
Screw terminals for DALI bus, control, power supply and LED source.
Documentation
Datasheet
STEKGD2DL1HV_EN• v. 1.5(19/02/2026)• PDF• 916,2 KB
Instructions
FISPEKGDXDLXHV06• v. 6.0(20/02/2026)• PDF• 1,2 MB
CE Conformity Declaration
CEEKGD2DL1HV• v. 1.0(29/03/2023)• PDF• 992,7 KB
UKCA Statement
UKCAEKGD2DL1HV• v. 1.0(29/03/2025)• PDF• 551,3 KB
Drawing
DQEKGD2DL1HV• DXF• 5,4 MB