Basic Pushbutton (No LED)

Code: EK-E32-TP

KNX

Technopolymer: Pure White (RAL 9016) - GAR

Description

The 4-fold pushbutton of Ekinex® FF series commands loads on/off switching, controls the dimming of lighting devices, controls motor drives for shutters or executes any other programmable command and control function.

The device integrates a KNX bus communication module and is intended for mounting onto a wall mounting box; it is supplied by a SELV voltage directly from the KNX bus and does not require any auxiliary power supply.

Functions

4-fold (possibility to configure up to 8 independent functions)
Switching and dimming of lighting loads
Control of motorised shutters, awnings and blinds
Recalling and saving of scenes
Single or double pushbutton operating modes
High-quality plastic casing
Frontal programming pushbutton and LED
Wall-mounting installation on round or square wall box (IP20 protection degree)

Technical data

30 Vdc power supply through KNX bus
Current consumption from bus < 15 mA
Frontal programming pushbutton and LED
Connection to bus line with KNX terminal block
Wall-mounting installation on round or square wall box (fixing holes 60 mm apart)
IP20 protection degree (installed)
Weight 80 g (with mounting support)
Operating temperature: -5 ... +45°C

Delivery

Delivery includes a terminal block for connection to the bus, a metal support for installation onto round or square mounting box (fixing holes 60 mm apart) and two pairs of fixing screws.

Accessories

The following accessories are available to be ordered separately:

Square or rectangular rockers
Square frame Form or Flank version (‘NF version is frameless)

Versions and Codes

Code	Mounting	Side profile
EK-E32-TP	With square frame Form or Flank version	Black
EK-E32-TP-NF	Without frame (‘NF version)	Black
EK-E32-TP-NFW	Without frame (‘NF version)	White

Configuration and Commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKE32TP##.knxprod (## = release). Available languages: English, French, German, Italian.