Touch&See Display with 2-fold Pushbutton EF2

FF Series • EK-EF2-TP

Technopolymer: Pure White (RAL 9016) - GAR

Description

Ekinex® Touch&See with 2-fold pushbutton (EK-EF2-TP) is a KNX device for the switching, control and display of bus functions.

By means of its touch-screen and the intuitive graphical user interface, it is possible to control KNX actuators in an easy and user-friendly way, to display information coming from KNX actuators and sensors and to perform as a room thermostat for a maximum of 8 independent zones. One temperature value can be measured from the integrated sensor, while the other values can be received from the bus.

The integrated 2-fold pushbutton allows the on/off command of loads, the dimming of lighting devices, the control of motor drives for shutters or the execution of any other programmable command and control function. The LEDs can be chosen in the colour combinations blue / green or white / red.

The device integrates a KNX bus communication module and is designed for mounting onto a wall-mounting box; it is powered by SELV voltage directly from the KNX bus and requires an auxiliary 30 Vdc power supply.

Functions / Features

3.5” TFT back-lit touch display, 320 x 240 pixel resolution, 65,536 colours
Seven main graphic pages
Room temperature controller function for up to 8 independent zones
Integrated temperature sensor
2-fold pushbutton (possibility to configure up to 4 independent functions)
4 freely programmable LEDs for each channel (e.g. status indication and/or night orientation light)
2 colour combinations available for the LEDs (blue/green or red/white)
Plastic casing
Connection to bus line with KNX terminal block
Connection to auxiliary power supply with yellow / white terminal block
Programming pushbutton and LED on the rear
Wall-mounting installation on round, square or rectangular wall box
IP20 protection degree (installed)
Weight: 130 g (with mounting support)

Technical Data

SELV power supply from KNX bus (communication)
30 Vdc auxiliary power supply (screen and logic)

Delivery

Delivery includes a terminal block for connection to the bus, a terminal block for connection to the auxiliary power supply, a metal support for installation onto round or square mounting box (fixing holes 60 mm apart) or rectangular mounting box (fixing holes 83.5 mm apart) and two pairs of fixing screws.

Accessories

The following accessories are available to be ordered separately:

2-fold square rockers (40 x 40 mm)
Rectangular frame Form or Flank version

Configuration and Commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKEF2TP##.knxprod (## = release). Available languages: English, French, German, Italian.