Touch&See Display EC2

Code: EK-EC2-TP

Phase Out

Technopolymer: Pure White (RAL 9016) - GAR

Description

Ekinex® Touch&See is a KNX device for the switching, control and display of bus functions.

By means of its touch-screen and its graphical user interface, it is possible to control KNX actuators in an easy and intuitive way, to display the information coming from the KNX actuators and sensors and to perform as a room thermostat for up to 8 independent zones, receiving the measured room temperature values from the bus.

The device integrates a KNX bus communication module and is designed for wall mounting boxes; it is powered by a SELV voltage directly from the KNX bus and requires an auxiliary 30 Vdc power supply.

Functions / Features

3.5” TFT back-lit touch display, 320 x 240 pixel resolution, 65,536 colours
Seven main graphic pages
Plastic casing
Connection to bus line with KNX terminal block
Connection to auxiliary power supply with yellow / white terminal block
Programming pushbutton and LED on the rear
Wall-mounting installation on round or square wall box (60 mm fixing distance)
IP20 protection degree (installed)
Weight 110 g (with mounting support)

Technical Data

SELV power supply from KNX bus (communication)
30 Vdc auxiliary power supply (screen)

Delivery

Delivery includes a terminal block for connection to the bus, a terminal block for connection to the auxiliary power supply, a metal support for installation onto round or square mounting box (fixing holes 60 mm apart) and two pairs of fixing screws.

Accessories

The following accessories are available to be ordered separately:

Square frame Form or Flank version ('NF version is used without frame)

Configuration and Commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKEC2TP##.knxprod (## = release). Available languages: English, French, German, Italian.