Pushbutton with thermostat

Code: EK-ED2-TP

KNX

Metal HT: Black Metal - CBM

Description

The 4-fold pushbutton of Ekinex® FF series commands loads on/off switching, controls the dimming of lighting devices, controls motor drives for shutters or executes any other programmable command and control function.

Thanks to the integrated temperature sensor, the pushbutton can work as a thermostat for a room or a zone. The LEDs can be chosen in the colour combinations blue / green or white / red. The device integrates a KNX bus communication module and is intended for mounting onto a wall mounting box; it is supplied by a SELV voltage directly from the KNX bus and does not require any auxiliary power supply.

Functions

4-fold (possibility to configure up to 8 independent functions)
4 freely programmable LEDs for each channel
2 colour combination available for the LEDs (blue/green or red/white)
Integrated temperature sensor
Room thermostat function
Plastic casing
Wall-mounting installation on round or square wall box
Connection to bus line with KNX terminal block
Frontal programming pushbutton and LED
IP20 protection degree (installed)
Weight 80 g (with mounting support)

Technical data

30 Vdc power supply through KNX bus
Current consumption from bus < 15 mA
Frontal programming pushbutton and LED
Connection to bus line with KNX terminal block
Wall-mounting installation on round or square wall box (fixing holes 60 mm apart)
IP20 protection degree (installed)
Weight 80 g (with mounting support)
Operating temperature: -5 ... +45°C

Delivery

Delivery includes a terminal block for connection to the bus, a metal support for installation onto round or square mounting box (fixing holes 60 mm apart) and two pairs of fixing screws.

Accessories

The following accessories are available to be ordered separately:

Square or rectangular rockers
Square frame Form or Flank version (‘NF version is frameless)

Versions and Codes

Code	LED colours	Mounting	Side profile
EK-ED2-TP	Blue / green	With square frame Form or Flank version	Black
EK-ED2-TP-RW	Red / white	With square frame Form or Flank version	Black
EK-ED2-TP-BG-NF	Blue / green	Without frame (‘NF version)	Black
EK-ED2-TP-RW-NF	Red / white	Without frame (‘NF version)	Black
EK-ED2-TP-BG-NFW	Blue / green	Without frame (‘NF version)	White
EK-ED2-TP-RW-NFW	Red / white	Without frame (‘NF version)	White

Configuration and Commissioning

A detailed description of the parameters can be found in the application manual of the device. Configuration and commissioning require ETS5 or later versions. ETS application program: APEKED2TP##.knxprod (## = release). Available languages: English, French, German, Italian.